Machine details

  • Storage ID 1082-08253
  • Category Drilling line
  • Make APOLLO
  • Type Easy drill / 1 Kopf - 2 Achsen
  • Build year Fabrikneu / new
  • Condition new
  • Control NC
  • Location producers factory
  • Origin Italy
  • Delivery terms about 65 working days
  • Quotation ex producers factory, free loaded
  • Price

Technical details

  • size of profile - max.150 x 70 mm
  • Number of drilling agregates1 Stk.
  • bore diameter18 mm
  • quill stroke90 mm
  • spindle taperMK 2
  • spindle turning speed range100 - 2200 U/min
  • impact length2100 mm
  • air pressure6 bar
  • feed speeds400 mm/s
  • y-axis300 mm/s
  • tube diameter min.20 mm
  • Min. distance hole/end of material35 mm
  • thread capacityM12
  • rounds stockmax. 80 mm
  • positioning accuracybei 3 m +/- 0,3 mm
  • total power requirement1,33 kW
  • weight of the machine ca.850 kg
  • dimensions of the machine 3,5 x 0,7 x 2 m

kein Zusatz angegeben


  • Cooling equipment (Micro-Cooler)
  • Electric 400 Volt50 hz - 3PH - N


New drilling machine with aut. spindle feeds in connection with an autom. feed system "Speedy" suitable for pipes or profiles. Drills automatically holes in the various programmed intervals in different lines with a single movable drill head - 2 controlled axes x + y, i. Length stop and drill head transversely. The material is clamped to the feed unit (made of aluminum) by means of a quick-clamping attached. The pneum. vise fixes the workpiece during the drilling phase. The machine drills with its autom. feed the hole, then move further in y-direction and drills the following holes, then the vise releases pneumatically and the feed moves to the next stored position, then clamps the vice again and the next cycle begins. The vise can be adjusted - readable via mm-scale. The MAX 12 control with alphanumeric grafic display stores 3 Programs with 99 different hole spacings, 99 times repeatable, USB interface. The speed of the material feed, the drilling feed, the drilling depth and the rotational speeds of the drill spindle are adjustable as needed. The x + y axis are equipped with a brushless motor. Included accessories: Speed adjustment via inverter, max. Speed 2200 rpm. Electronic device for programming the feeds for two end positions. Thus, drilling with two-stage drills possible in connection with two different speeds between 11 - 2200 rpm. Special clamping device for drilling at the workpiece end with at least 35 mm. Necessary packaging Special accessories on request: Roller for material, height adjustable. Special clamping devices against surcharge, with special clamping jaws rectangular tube up to 150 x 150 mm and round tube up to 150 mm possible. It is neccesary to send to the manufacturer profiles for testing purposes. The special drilling machines can also be equipped with 2 drill heads, or horizontal / vertical heads. Tools such as holders, drills, step drills, etc. are not included. Machine dealer with own stock of 2500 m².

Documents & Videos

#1082-08253 - Drilling line APOLLO Easy drill / 1 Kopf - 2 Achsen